Pre-Departure Inspection for Shunhao’s Machines:
- Verify that the terminals of the electric control box are securely fastened.
- Verify that all oil pipes and hydraulic components are securely fastened and tight.
- Verify that the screws on the heating plate are securely tightened.
- Test the electric heater, thermostat, ammeter, and temperature sensing wire to determine if they are faulty or damaged.
- Debug the machine's upward and downward movements as well as the air exhaust (mould shift) functions.
- Debug the machine at its highest operating pressure.
- Machine Calibration.
What is the manufacturing process for melamine tableware?
- Place the powder into the melamine mold (cavity or punch).
- Press the Curing button, and close the molds (approximately 80-120 seconds).
- Open the mold, place the decal paper, and press the Paper button (approximately 30 seconds).
- Open the mold, then place the shiny powder and press the glaze button (approximately 15 seconds).
- Open the mold, remove the finished products, and clean the mold using an air gun.
What Are the Available After-Sales Services from Shunhao?
- First-time installation service and training service are available.
- Maintenance service is available annually.
- Spare parts for hydraulic machines are available for immediate supply.
